AMPERITE® HEADLIGHT DAYTIME MODULATOR

Designed to enhance awareness of motorcycle headlight illumination for safety during daylight hours 100% solid state Quick and easy installation Designed to enhance awareness of motorcycle headlight illumination in accordance with Federal Standard 49, CFR Part 571.106. An external disable switch is used to disable the modulation function during nighttime driving. During the day it flashes the headlamp every 1/10 th of a second. Essentially functions as a 2-terminal device that is connected in series with the power feed to the light. This safety device has been designed for motorcycle use, to provide additional awareness to other vehicles on the road during daylight hours. The rate of modulation is 200 to 280 cycles per minute, with maximum power being applied to the headlight for 50 to 70% of each cycle. During the low intensity portion of the cycle, power to the headlight is held to no less than 17% of maximum intensity. Incandescent lamp power rating of 120-Watts. The output circuit is a solid state switching transistor. Input voltage of 11 to 16-Volts (standard automotive range). Composed of glass reinforced black Lexan plastic, epoxy encapsulated for maximum protection against moisture and vibration. Two 1/4" quick-connect male terminals. Single hole mounting or 2 hole panel mount available at extra cost. Operates at a temperature range of -40°C to +60°C (-40°F to +140°F). Dimensions: 1-3/4"W x 7/8"H x 1-1/8"L. Check local laws before ordering.